Wiki source code of Running KEITH

Version 19.1 by Soeren Domroes on 2019/05/16 10:29

version	line-number	content
7.1	1	= Running KEITH =
6.1	2
7.1	3
	4
16.1	5	{{toc maxLevel="2"/}}
6.1	6
5.1	7	== Setting up your eclipse ==
1.1	8
8.1	9	For everything not mentioned here refer to [[Getting Eclipse>>doc:KIELER.Getting Eclipse\|\|shape="rect"]] guide.
1.1	10
15.1	11	Use the installer go to advanced mode, add the KIELER url. Then select first pragmatics and after that semantics (that is very important).
1.1	12
15.1	13	Select the Theia stream for semantics and the Keith stream for pragmatics and use the latest eclipse if possible. Set the targetplatform to photon (or latest?) and finish.
1.1	14
8.1	15	Wait till everything installs and the setup tasks finish. If you have any problems in this stage refer to the [[Getting Eclipse>>doc:KIELER.Getting Eclipse\|\|shape="rect"]] guide.
1.1	16
5.1	17	\\
1.1	18
13.1	19	The setup tasks for Modular Target will fail. Disable it after this happens and execute them again via //Help>Perform Setup Tasks//. Open the //plug-in development// perspective. Select working sets as top level elements. Run //clean build//. Several pragmatics projects have errors. Just close them and you will be fine.
1.1	20
5.1	21	To run the language server go to //Run Configurations// create a new //eclipse application// run configuration and select //Run an application// and //de.cau.cs.kieler.language.server.LanguageServer//
1.1	22
5.1	23	== [[image:attach:Screenshot from 2019-02-15 14-10-50.png]] ==
1.1	24
5.1	25	\\
1.1	26
5.1	27	You have to edit the arguments too. The Vm arguments host and port are added to connect the LS via socket.
1.1	28
5.1	29	[[image:attach:Screenshot from 2019-02-15 14-13-34.png]]
1.1	30
5.1	31	The default port to which KEITH tries to connect is 5007.
1.1	32
	33	== Setting up a KEITH developer setup... ==
	34
	35	General requirements:
	36
	37	* node
	38	* npm (whatever node installs)
	39	* yarn (latest version)
	40	* Python (2.7.X)
	41	* gcc, g++, and make (for native dependencies of some npm packages)
	42	* [[Visual Studio Code>>url:https://code.visualstudio.com/\|\|shape="rect"]] (latest version)
	43	* a cloned [[keith >>url:https://git.rtsys.informatik.uni-kiel.de/projects/KIELER/repos/keith/browse\|\|shape="rect"]]repository
	44
	45	== ... on linux: ==
	46
	47	(Theia has a [[guide >>url:https://www.theia-ide.org/doc/authoring_extensions\|\|shape="rect"]]for extension development that might be helpful)
	48
	49	install node 8:
	50
	51	{{code}}
	52	curl -o- https://raw.githubusercontent.com/creationix/nvm/v0.33.5/install.sh \| bash
	53	nvm install 8
	54	{{/code}}
	55
	56	Install python if you haven't (remember: Python 2: , Python 3: ).
	57
	58	{{code language="none"}}
	59	Install yarn (a package manager build on the package manager npm):
	60	{{/code}}
	61
	62	{{{}}}
	63
	64	\\
	65
	66	{{code}}
	67	npm install -g yarn
	68	{{/code}}
	69
	70	\\
	71
	72	== ... on windows: ==
	73
	74	Install [[node 8>>url:https://nodejs.org/download/release/v8.15.0/\|\|shape="rect"]] for windows. I personally used the {{code language="none"}}.msi{{/code}}.
	75
11.1	76	Use that to install windows-build-tools by executing the command in an administrative powershell.
1.1	77
	78	{{code}}
	79	npm install -g windows-build-tools
	80	{{/code}}
	81
15.1	82	This installs make, gcc, g++, python and all this. Somehow this does not really terminate. If nothing happens anymore it may be finished, just kill the process if it does not terminate.
1.1	83
15.1	84	All the installed executables are not in the path and that is okay. This is not needed since yarn/npm knows how to call them when needed.
	85
14.1	86	Yarn can be downloaded and installed from [[here>>url:https://yarnpkg.com/lang/en/docs/install/#windows-stable\|\|shape="rect"]].
	87
11.1	88	=== Known Problems in this step ===
	89
15.1	90	If python3 was already installed this may cause some problems.
11.1	91
1.1	92	== ... on mac: ==
	93
	94	Get a package manager, something like [[brew>>url:https://brew.sh/index_de\|\|shape="rect"]].
	95
	96	Use brew to install all necessary stuff.
	97
	98	Apparently there is an issue with xcode-select: [[Theia developers>>url:https://github.com/theia-ide/theia/blob/master/doc/Developing.md\|\|shape="rect"]] recommend the following:
	99
	100	{{code}}
	101	xcode-select --install
	102	{{/code}}
	103
5.1	104	After doing this for your OS all that is missing is running KEITH (in developer setup) and setting up your eclipse for language server development).
1.1	105
5.1	106	= Stuff that may help =
1.1	107
5.1	108	== Running the already build LS ==
1.1	109
5.1	110	Go to the latest [[Bamboo build>>url:https://rtsys.informatik.uni-kiel.de/bamboo/browse/KISEMA-NSI\|\|shape="rect"]] and go to Artifacts.
1.1	111
5.1	112	[[image:attach:image2019-2-7_17-46-58.png]]
1.1	113
5.1	114	Select Language Server Zip and download the LS and unpack it somewhere.
	115
	116	Locate the kieler.ini file. Depending on the OS it has a different location (linux; toplevel, windows, toplevel, mac: Content/Eclipse/kieler.ini)
	117
	118	Paste the following at the beginning of the ini-file:
	119
1.1	120	{{code language="bash"}}
5.1	121	-application
	122	de.cau.cs.kieler.language.server.LanguageServer
	123	-noSplash
1.1	124	{{/code}}
	125
5.1	126	Since an eclipse application is built, this is needed to start the LS without a splashscreen.
1.1	127
5.1	128	If you want to connect that LS via socket to your Theia application (KEITH) add the following to the vmargs:
3.1	129
5.1	130	{{code}}
	131	-Dport=5007
	132	{{/code}}
1.1	133
5.1	134	5007 is the standard port KEITH is currently connecting to in socket mode. You can find this port in your Theia application at the following location:
1.1	135
5.1	136	Assume you are in the [[keith >>url:https://git.rtsys.informatik.uni-kiel.de/projects/KIELER/repos/keith/browse\|\|shape="rect"]]repository. Go to {{code language="none"}}keith-app{{/code}}, you should see something like this:
1.1	137
5.1	138	[[image:attach:image2019-2-7_17-58-22.png]]
1.1	139
5.1	140	Open the {{code language="none"}}package.json{{/code}}. In the{{code language="none"}} package.json{{/code}} are several scripts defined.
3.1	141
5.1	142	[[image:attach:image2019-2-7_18-0-7.png]]
1.1	143
5.1	144	The {{code language="none"}}LSP_PORT{{/code}} option is used to activate the connection via socket. It is also possible to specify a relative location to a LS via {{code language="none"}}LS_PATH=<path to LS>{{/code}}.
3.1	145
1.1	146	\\
	147
5.1	148	== How run KEITH in developer setup (socket) ==
3.1	149
5.1	150	Run the following to build and run KEITH in its developer setup (in socket mode, so the LS has to be started separately)
3.1	151
5.1	152	{{code language="bash"}}
	153	yarn && cd keith-app && yarn run socket
	154	{{/code}}
	155
13.1	156	//yarn// builds all the stuff. //yarn run socket// in keith-app starts the application. After an initial build via yarn you can run //yarn watch // to watch the changes in your repository. In another console you run yarn run socket in keith-app. Now refreshing your browser is enough to apply the changes.
	157
5.1	158	Per default the KEITH opens on localhost:3000.
	159
	160	It is required to restart the language server if KEITH is restarted, since the diagram view has a problem (since theia-sprotty is used) to reconnect after that.
7.1	161
13.1	162	=== Known issues for windows: ===
	163
	164	nsfw.code not found: In the top level package.json exists a script called postinstall. Remove this on windows, delete the node_modules folder and rebuilt the application. This is a known issue of electron-builder.
	165
	166	=== Known issues on mac: ===
	167
	168	Since SWT is still used as part of the diagram synthesis (but is not relevant anymore). Since it is not called on the main thread this causes a deadlock. Therefore mac just does not work.
	169
	170	=== Known issues: ===
	171
	172	Refreshing the browser is not enough for the diagram to work. If the diagram is needed the language server has to be restarted before the browser is refreshed. This is a known issue in theia-sprotty.
	173
7.1	174	= Developing for KEITH =
	175
9.1	176	We use java ServiceLoader to register stuff. Here is a small example how a LanguageServerExtension is registered via a ServiceLoader and how it is used:
	177
19.1	178	== Register LanguageServerExtensions (ServiceLoader Example) ==
9.1	179
19.1	180	This is a LanguageServerExtension. It has to be used in the de.cau.cs.kieler.language.server plugin. Since the language-server-plugin should not have dependencies to all plugins that define a language server extension dependency inversion is used to prevent that. A ServiceLoader does exactly that.
9.1	181
	182	Here is such an example extension, the KiCoolLanguageServerExtension:
	183
	184	{{code}}
	185	package de.cau.cs.kieler.kicool.ide.language.server
	186
	187
10.1	188	/**
	189	* @author really fancy name
	190	*
	191	*/
9.1	192	@Singleton
19.1	193	class KiCoolLanguageServerExtension implements ILanguageServerExtension, CommandExtension, ILanguageClientProvider {
	194	// fancy extension stuff
	195
	196	// A language server extension must implement the initialize method,
	197	// it is however only called if the extension is registered via a language.
	198	// This should never be the case, so this is never called.
	199	override initialize(ILanguageServerAccess access) {
	200	this.languageServerAccess = access
	201	}
	202
9.1	203	}
	204	{{/code}}
	205
19.1	206	The CommandExtension defines all commands (requests or notifications) that are send from client to server. An example how this looks like can be seen in the code snippet Example CommandExtension in the section Register an extension (on server side).
	207
	208	\\
	209
9.1	210	This language server extension is provided by a corresponding contribution, which is later used to access it:
	211
	212	{{code}}
	213	package de.cau.cs.kieler.kicool.ide.language.server
	214
	215	import com.google.inject.Injector
	216	import de.cau.cs.kieler.language.server.ILanguageServerContribution
	217
	218	/**
	219	* @author really fancy name
	220	*
	221	*/
	222	class KiCoolLanguageServerContribution implements ILanguageServerContribution {
	223
	224	override getLanguageServerExtension(Injector injector) {
	225	return injector.getInstance(KiCoolLanguageServerExtension)
	226	}
	227	}
	228	{{/code}}
	229
10.1	230	Create a file called de.cau.cs.kieler.language.server.ILanguageServerContribution in <plugin>/META-INF/services/ (in this example this is de.cau.cs.kieler.kicool.ide). The name of the file refers to the contribution interface that should be used to provide the contribution. The content of the file is the following:
9.1	231
10.1	232	{{code}}
	233	de.cau.cs.kieler.kicool.ide.language.server.KiCoolLanguageServerContribution
	234	{{/code}}
	235
11.1	236	This is the fully qualified name of the contribution written earlier.
10.1	237
11.1	238	The language server uses all LanguageServerExtensions like this:
	239
	240	{{code}}
	241	var iLanguageServerExtensions = <Object>newArrayList(languageServer) // list of all language server extensions
	242	for (lse : KielerServiceLoader.load(ILanguageServerContribution)) { // load all contributions
	243	iLanguageServerExtensions.add(lse.getLanguageServerExtension(injector))
	244	}
	245	{{/code}}
	246
	247	The resulting list of implementions is used to add the extensions to the language server.
	248
7.1	249	== Register an extension (on server side) ==
	250
11.1	251	See example above for ServiceLoader and initial stuff.
7.1	252
11.1	253	What is still missing are the contents of the CommandExtension implemented by the KiCoolLanguageServerExtension. This is an interface defining all additional commands. The CommandExtension looks like this.
	254
19.1	255	{{code title="Example CommandExtension"}}
11.1	256	package de.cau.cs.kieler.kicool.ide.language.server
	257
	258	import java.util.concurrent.CompletableFuture
	259	import org.eclipse.lsp4j.jsonrpc.services.JsonRequest
	260	import org.eclipse.lsp4j.jsonrpc.services.JsonSegment
	261
	262	/**
	263	* Interface to the LSP extension commands
	264	*
	265	* @author really fancy name
	266	*
	267	*/
	268	@JsonSegment('keith/kicool')
	269	interface CommandExtension {
	270
	271	/**
	272	* Compiles file given by uri with compilationsystem given by command.
	273	*/
	274	@JsonRequest('compile')
	275	def CompletableFuture<CompilationResults> compile(String uri, String clientId, String command, boolean inplace);
	276
	277	/**
	278	* Build diagram for snapshot with id index for file given by uri. Only works, if the file was already compiled.
	279	*/
	280	@JsonRequest('show')
	281	def CompletableFuture<String> show(String uri, String clientId, int index)
	282
	283	/**
	284	* Returns all compilation systems which are applicable for the file at given uri.
	285	*
	286	* @param uri URI as string to get compilation systems for
	287	* @param filter boolean indicating whether compilation systems should be filtered
	288	*/
	289	@JsonRequest('get-systems')
	290	def CompletableFuture<Object> getSystems(String uri, boolean filterSystems)
	291	}
	292	{{/code}}
	293
	294	This defines three json-rpc commands: "keith/kicool/compile", "keith/kicool/show", "keith/kicool/get-systems". These are implemented in KiCoolLanguageServerExtension.
	295
	296	== Register and calling an extension (on client side) ==
	297
	298	Language server extension do not have to be registered on the client side. It is just called.
	299
	300	You can send a request or a notification to the language server like this:
	301
	302	{{code}}
	303	const lclient = await this.client.languageClient
	304	const snapshotsDescriptions: CodeContainer = await lclient.sendRequest("keith/kicool/compile", [uri, KeithDiagramManager.DIAGRAM_TYPE + '_sprotty', command,
	305	this.compilerWidget.compileInplace]) as CodeContainer
	306	// or via a thenable
12.1	307	client.languageClient.then(lClient => {
13.1	308	lClient.sendRequest("keith/kicool/compile").then((snapshotsDescriptions: CodeContainer) => {
12.1	309	// very important stuff
	310	}
	311	// await is preferred, since it is shorter.
	312	{{/code}}
11.1	313
13.1	314	In this example client is an instance of a language client. It is usually injected like this:
11.1	315
12.1	316	{{code}}
	317	constructor(
	318	@inject(KeithLanguageClientContribution) public readonly client: KeithLanguageClientContribution
	319	// other injected classes
	320	) {
	321	// constructor stuff
	322	}
11.1	323	{{/code}}
	324
	325	\\
	326
13.1	327	== How to make a new package for KEITH ==
7.1	328
13.1	329	Clone the [[KEITH repository>>url:https://git.rtsys.informatik.uni-kiel.de/projects/KIELER/repos/keith/browse\|\|shape="rect"]].
	330
	331	Open the keith folder in VSCode. You are know in the keith directory in VSCode.
	332
	333	You see something like this: TODO picture
	334
	335	Create a new folder called keith-<your extension name>.
	336
	337	Copy a package.json, a tslint.json, a tsconfig.json, and a src folder into the folder.
	338
	339	Add keith-<your extension name> to workspaces in the top level package.json.
	340
	341	Add "keith-<your extension name>(% style="color: rgb(0,0,0);" %)": (%%)"0.1.0"(% style="color: rgb(0,0,0);" %) to the dependencies in the top level package.json and the product package.json files (e.g. the package.json in keith-app).
	342
	343	=== What is in the src directory? ===
	344
	345	The source directory has three optional subfolders.
	346
	347	* node: Holds all backend related classes. This does currently only exist in the [[keith-language package>>url:https://git.rtsys.informatik.uni-kiel.de/projects/KIELER/repos/keith/browse/keith-language\|\|shape="rect"]].
	348	* common: Holds general helper methods, string constants and some data classes
	349	* browser: Holds all widgets, contribution for commands, menus, and widgets, and the frontend-extension.
	350
	351	==== The frontend-extension ====
	352
	353	This binds all necessary classes. Look at existing frontend extension in [[KEITH>>url:https://git.rtsys.informatik.uni-kiel.de/projects/KIELER/repos/keith/browse\|\|shape="rect"]] or [[Theia>>url:https://github.com/theia-ide/theia/tree/master/packages\|\|shape="rect"]] to see how this is done.
	354
	355	==== More examples for stuff ====
	356
	357	See [[Theia examples>>url:https://www.theia-ide.org/doc/Commands_Keybindings.html\|\|shape="rect"]].
	358
7.1	359	== How to write a widget ==
13.1	360
	361	There are different kinds of widgets that are commonly used in [[KEITH>>url:https://git.rtsys.informatik.uni-kiel.de/projects/KIELER/repos/keith/browse\|\|shape="rect"]] or in existing [[Theia packages>>url:https://github.com/theia-ide/theia/tree/master/packages\|\|shape="rect"]].
	362
	363	* BaseWidget: Very basic
	364	* ReactWidget: A render method has to be implemented that redraws the widget on demand. Additionally several on* event methods can beimplemented.
	365	* TreeWidget: Extends the ReactWidget and draws the contents of the widget in a tree view.
	366
	367	If a widget has a state it should implement the StatefulWidget interface, which allows to imlement a store and restore method.
	368
	369	Look at examples in KEITH or Theia to see how this is done.
	370
18.1	371	== How to make a new module for sprotty (see actionModule, ...) ==
	372
	373	WIP
	374
13.1	375	\\

Wiki source code of Running KEITH

Navigation

Quick Links